img not found img not found

404 Not Found

image not found

Oops! That page can't be found.

Back to homepage

Q1: January 1, 2008 is Tuesday. What day of the week lies on Jan 1, 2009?

A Wednesday

B Sunday

C Thursday

D Monday

Directions to Solve

In each of the sentences given below a word is printed in bold. Below it four choices are given. Pick up the one which is most nearly the same in meaning as the word printer in bold and can replaces it without altering the meaning of the sentence.

Q2: After the dismal performance of the team in the series concluded yesterday, the captain offered his resignation to the president of the club.

A short

B minimum

C poor

D sorrowful

Q3: Which of the following statement is wrong?

A The gouges are chisels with a hollow shaped blade.

B all of these

C An auger is a planing tool

D The mortise gauge has two scribing pins.

Q4: In a compound die

A two or more operations are performed simultaneously at the single stroke of the ram

B both cutting and non-cutting operations are performed at one station of the press in every stroke of the ram

C two or more cutting operations are performed at one station of the press in every stroke of the ram

D only one operation is performed at each stroke of the ram

Q5: A file removes the metal during

A return stroke

B none of these

C both forward and return strokes

D forward stroke

Q6: In spot welding, the spacing between two spot weld should not be less than

A 6 d

B 3 d

C 1.5 d

D d

Q7: Aluminium is the best material for making patterns because it is

A all of these

B corrosion resistant

C light in weight

D easy to work

Q8: Gagger is used for cleaning the moulding sand.

A Incorrect

B Correct

Q9: In sheet metal work, the cutting force on the tool can be reduced by

A grinding the cutting edges sharp

B providing shear on tool

C increasing the hardness of tool

D increasing the hardness of die

Q10: In order to get uniform thickness of the plate by rolling process, one provides

A hardening of the rolls

B antifriction bearings

C offset on the rolls

D camber on the rolls