img not found img not found

404 Not Found

image not found

Oops! That page can't be found.

Back to homepage

Directions to Solve

In each of the sentences given below a word is printed in bold. Below it four choices are given. Pick up the one which is most nearly the same in meaning as the word printer in bold and can replaces it without altering the meaning of the sentence.

Q1: When the police questioned him, he gave very incoherent answer at first.

A irrelevant

B inconsistent

C irrational

D irritating

Q2: The difference between the upper limit and lower limt of a dimension is called

A actual size

B tolerance

C basic size

D nominal size

Q3: Green sand is a mixture of

A 50% sand and 50% clay

B 70% sand and 30% clay

C 30% sand and 70% clay

D 90% sand and 10% clay

Q4: The diaphragm moulding machine is used to

A produce uniform packing of sand in the mould

B give uniform sand hardness throughout the mould

C ram the sand harder at the pattern face with decreasing hardness towards the back of the mould

D ram the sand harder at the back of the mould and softer on the pattern face

Q5: A pattern is used to make the mould cavity for pouring the molten metal for casting.

A Yes

B No

Q6: The surface to be left unmachined is marked on the pattern by

A yellow colour

B black colour

C red colour

D blue colour

Q7: The two rolls in a two high rolling mills are of __________ size.

A equal

B different

Q8: The welding process used in joining mild steel shanks to high speed drills, is

A flash butt welding

B spot welding

C seam welding

D upset butt welding

Q9: The mode of deformation of the metal during spinning is

A bending and stretching

B bending

C stretching

D rolling and stretching

Q10: The process used to improve fatigue resistance of the metal by setting up compressive stresses in its surface, is known as

A cold peening

B cold heading

C extrusion

D hot piercing