img not found img not found

404 Not Found

image not found

Oops! That page can't be found.

Back to homepage

Directions to Solve

Find the correctly spelt words.

Q1: (solve as per the direction given above)

A Licentious

B Swelte

C Puessile

D Filpant

Q2: The acceleration of the particle moving with simple harmonic motion is inversely proportional to the displacement of the particle from the mean position.

A Yes

B No

Q3: In vibration isolation system, the transmissibility will be equal to unity, for all values of damping factor, if ω/ωn is

A less than 2

B equal to 2

C equal to one

D greater than 2

Q4: The two links OA and OB are connected by a pin joint at O. If the link OA turns with angular velocity ω1 rad/s in the clockwise direction and the link OB turns with angular velocity ω2 rad/s in the clockwise direction, then the rubbing velocity at the pin joint O is (where r = Radius of the pin at O)

A ( ω1 - ω2)2r

B ( ω1 - ω2)r

C ω1.ω2.r

D ( ω1 + ω2)r

Q5: If ω/ωn = 2, where co is the frequency of excitation and ωn is the natural frequency of vibrations, then the transmissibility of vibration will the

A 0.5

B 1

C 2

D 1.5

Q6: A disturbing mass m1 attached to the rotating shaft may be balanced by a single mass m2 attached in the same plane of rotation as that of m1, such that (where r1 and r2 are the radii of rotation of m1 and m2 respectively)

A m1r1 = m2r2

B m1m2 = r1r2

C none of these

D m1r2 = m2r1

Q7: In railway axle boxes, the bearing used is

A double row spherical roller bearing

B cylindrical roller bearing

C double row self-aligning ball bearing

D deep groove ball bearing

Q8: When the two elements of a pair have a surface contact when relative motion takes place and the surface of one element slides over the surface of the other, the pair formed is known as a

A lower pair

B higher pair

C self-closed pair

D force-closed pair

Q9: The centre distance between two meshing involute gears is equal to

A

B

C

D

Q10: The two elements of a pair are said to form a __________ when they permit relative motion between them.

A open pair

B kinematic pair